Powered by 300.cn
Messages
Learn About Goode
Solution
Contact Us
No. 88, Fenyang Road, Fenhu Road, Wujiang District, Suzhou City, Jiangsu Province
Email：goode@goodeeis.com
Tel：0512-6326-3955
Fax：0512-6326-3977
Copyright © Goode EIS All Rights Reserved. 苏ICP备16010754号-1
PRODUCT
— Product Solution —
Pipe resin system, used in high pressure dry casting casing and winding FRP casing. The pouring resin system is suitable for vacuum pouring of wrinkle paper high pressure sleeve products. The system has excellent technological characteristics. After curing, the system has excellent mechanical, electrical and heat resistance, low dielectric loss, and the original imported and localized products meet different needs. The winding resin system is suitable for electrical winding FRP products.
|
Number |
Product model |
Tg，℃ |
Dielectric lossTgδ（%） |
Characteristics |
|
1 |
Episol®E4527/K4517/CA130 |
90-110 |
0.15 |
Low viscosity, low exothermic reaction, low exothermic shrinkage and low dielectric loss |
|
2 |
Episol®E4528/K4516/CA130 |
90-105 |
0.16 |
Low viscosity, low dielectric loss, suitable for winding casing |
High Thermal Conductivity Resin System for Motor Casting
|
Number |
Product model |
Tg，℃ |
Thermal conductivity,W/m.K |
Characteristics |
|
1 |
Episol®6019MC |
65-80 |
0.8-1.2 |
Low viscosity, good permeability, good mechanical properties, long operation time, good thermal conductivity |
| 2 | Episol®8687L | 105-120 | 1.0-1.5 | Based on HEXION imported high toughness resin system, pre-filler & lt;, excellent mechanical strength, good toughness> |
|
3 |
Episol®8645L |
80-90 |
1.0-1.5 |
Based on HEXION imported high toughness resin system, pre-filled, H-grade heat-resistant grade, excellent toughness |